Juniper C13-C14 Black 2.5 m C13 coupler C14 coupler
Lock Added: N/A
AC PWR CBL-PATCH CORD 10A/250V 2.5M
Related products
Description
Each AC power supply has a single AC appliance inlet located on the power supply that requires a dedicated AC power feed. Most sites distribute power through a main conduit that leads to frame-mounted power distribution panels, one of which can be located at the top of the rack that houses the switch. An AC power cord connects each power supply to the power distribution panel.
Each detachable AC power cord is 2.5 meters (approximately 8 feet) long. The appliance coupler at the female end of the cord inserts into the AC appliance inlet on the faceplate of the AC power supply. The coupler type is C19/C13 as described by the International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.
| Feature | Feature Value |
|---|---|
| Product colour | Black |
| Connector 1 gender | Female |
| Connector 2 gender | Male |
| Cable length | 2.5 m |
| Connector 1 | C13 coupler |
| Connector 2 | C14 coupler |
| Overload protection | No |
| Magnetically shielded | No |
| Input voltage | 250 V |
| AC input frequency | 50 Hz |
| Input current | 16 A |
Additional information
| Product colour | Black |
|---|---|
| Connector 2 gender | Male |
| Connector 1 | C13 coupler |
| Overload protection | No |
| Input voltage | 250 V |
| Input current | 16 A |
| Connector 1 gender | Female |
| Cable length | 2.5 m |
| Connector 2 | C14 coupler |
| Magnetically shielded | No |
| AC input frequency | 50 Hz |