Description
10/100/1000T to 100Mbps/1000Mbps SFP industrial temperature media converter. These converters feature Smart MissingLink™ (SML) and support up to 10K jumbo frames. The IMC2000T/SP-980 can be mounted on a DIN-rail or used as a desktop/standalone device and is fanless for silent operation.
Powering remote devices
Allied Telesis IMC200/2000 Series Industrial Media Converters (IMCs) are ideal for powering remote devices, such as IP phones, video cameras and wireless Access Points (APs), which are more than 100m from a Power over Ethernet (PoE) switch. Each IMC can provide up to 70W of PoE.
The 2000T/SP and the 2000TP/SP each feature a 10/100/1000T twisted-pair port, and an SFP port which supports and auto detects 100X and 1000X optics. No switch configuration is needed. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode and BiDi optics.
Models with a fixed fiber-optic port are available with SC or LC connectors. With these, you can achieve distances up to 2 km (100Mps) or 550 m (1000Mps). With the SFP model, you can achieve greater distances using a long-range SFP.
In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote PoE powered device to operate without any additional power source. All PoE+ devices (IEEE802.3at compliant) are supported. All PoE+ devices support 802.3at, PoE+, LTPoE++ and 4-pair. The PC200x PoE+ Series can deliver up to 70W of power to the remote device.
Remote Power Cycle
The IMC200/2000 Series supports the Remote Power Cycle feature. This allows a remote administrator to log in to the host switch device and disable the switch port to which the IMC is attached, causing the PoE+ device to lose power. This allows administrators to reset remote devices without physically going to the location.
Jumbo frame support
Many backbone switch products support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) which sends extra-long data packets on the network. The IMC200/2000 Series are fully compatible with these long packets, enabling them to be used in modern networks.
Smart MissingLink™ (SML)
The SML feature monitors network connections and provides a notification when a link fails, allowing administrators to quickly identify the source and location of failed links, and thus minimize downtime.
| Feature |
Feature Value |
| Maximum data transfer rate |
1000 Mbit/s |
| Converter input interface |
10Base-T, 100Base-T, 1000Base-T |
| Converter output interface |
100Base-X, 1000Base-X |
| Ethernet interface type |
Fast Ethernet, Gigabit Ethernet |
| Ethernet LAN data rates |
10,100,1000 Mbit/s |
| Packet forwarding rate (10 Mbps) |
14880 pps |
| Packet forwarding rate (100 Mbps) |
148800 pps |
| Packet forwarding rate (1 Gbps) |
1488000 pps |
| Jumbo frames support |
Yes |
| Jumbo frames |
10000 |
| VLAN support |
Yes |
| Auto MDI/MDI-X |
Yes |
| Auto-negotiation |
Yes |
| Store-and-forward |
Yes |
| Duplex system |
Full, Half |
| Fiber optic connector |
SFP |
| Connectivity technology |
Wired |
| Ethernet LAN (RJ-45) ports |
1 |
| Fiber ports quantity |
1 |
| Wavelength |
850 nm |
| Tx power (min) |
-9.5 dBmW |
| Tx power (max) |
-4 dBmW |
| Rx power (min) |
-17 dBmW |
| Rx power (max) |
-3 dBmW |
| Internal |
No |
| LED indicators |
Yes |
| Product colour |
Grey |
| International Protection (IP) code |
IP30 |
| DIN rail mounting |
Yes |
| Safety |
UL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1 (TUV mark) |
| Certification |
TAA
EMI/Emission & Stability
FCC Class A
EN55024 (immunity standard)
EN55032 Class A
EN55035
VCCI Class A |
| Input voltage |
12 – 48 V |
| Width |
111 mm |
| Depth |
96 mm |
| Height |
35 mm |
| Weight |
748 g |
| Operating temperature (T-T) |
-40 – 75 °C |
| Storage temperature (T-T) |
-40 – 85 °C |
| Operating relative humidity (H-H) |
5 – 95% |
| Storage relative humidity (H-H) |
5 – 95% |
| Operating altitude |
0 – 3048 m |
| Sustainability certificates |
RoHS |
| Harmonized System (HS) code |
85176990 |
