Description
The HPE Aruba Networking CX 8360 v2 Switch Series are designed for next-generation core and aggregation layer of campuses, as well as virtual and highly dynamic data center environments. Provide up to 4.8 Tbps switching capacity, with line-rate Gigabit Ethernet interfaces including support for HPE Smart Rate (1/2.5, 5 Gbps), 10 Gbps, 25 Gbps, 40 Gbps, 50 Gbps, and 100 Gbps connectivity in a compact 1U form factor. These switches deliver a fantastic investment for customers wanting to migrate from older 1 GbE/10 GbE to faster 25 GbE, or from 10 GbE/40 GbE uplinks to 50/100 GbE ports. In addition, the 48 and 32 x 25G port CX 8360 models support low-density MACsec ports and enable secured connectivity at 10 GbE and 25 GbE over unsecured domains. MACsec is also supported on 2 high-speed 40/100 G ports on the CX 8360 48-port model.
What is new supporting point:
High availability with industry-leading VSX redundancy and redundant power supplies and fans.
Intelligent monitoring and visibility delivered by the HPE Aruba Networking Network Analytics Engine (NAE)
High-performance 4.8 Tbps and 2,678 Mpps. 50G support on 8360-48Y6C, 32Y4C and 16Y2C switches. Addition of HPE Smart Rate (1/2.5/5/10 G) ports on the 836048XT4C
48-port 1/10/25 G with 4 MACsec, 6-port of 40/100 G with 2 MACsec. MACsec secured connectivity over untrusted domains.
| Feature |
Feature Value |
| Switch type |
Managed |
| Switch layer |
L3 |
| Quality of Service (QoS) support |
Yes |
| Basic switching RJ-45 Ethernet ports quantity |
0 |
| Basic switching RJ-45 Ethernet ports type |
No |
| Installed SFP modules quantity |
0 |
| Installed SFP+ modules quantity |
0 |
| SFP+ module slots quantity |
32 |
| QSFP+ module slots quantity |
4 |
| Console port |
RJ-45/USB Type-C |
| Networking standards |
IEEE 802.1AE, IEEE 802.1AX, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ak, IEEE 802.1p, IEEE 802.1s, IEEE 802.1t, IEEE 802.1v, IEEE 802.1w, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3ba, IEEE 802.3by, IEEE 802.3cc, IEEE 802.3cd, IEEE 802.3x, IEEE 802.3z |
| 10G support |
Yes |
| Port mirroring |
Yes |
| Flow control support |
Yes |
| Link aggregation |
Yes |
| Spanning tree protocol |
Yes |
| Ethernet LAN data rates |
1000,10000,25000,40000,100000 Mbit/s |
| VLAN support |
Yes |
| Number of VLANs |
4094 |
| MAC address table |
212992 entries |
| Switching capacity |
2400 Gbit/s |
| Throughput |
2678 Mpps |
| Jumbo frames support |
Yes |
| Packet buffer memory |
32 MB |
| DHCP features |
DHCP server |
| Access Control List (ACL) |
Yes |
| IGMP snooping |
Yes |
| IGMP entries |
7000 |
| Security algorithms |
SNMPv2, SNMPv3 |
| SSH/SSL support |
Yes |
| Authentication type |
RADIUS, TACACS+ |
| Multicast support |
Yes |
| Routing protocols |
BGP4, MPLS, OSPF, OSPFv3, RIP, RIPng |
| IPv4 & IPv6 features |
IPv4/IPv6 access-control list (ACL) |
| Rack mounting |
Yes |
| Form factor |
1U |
| Ventilation system |
Back-to-front airflow |
| Airflow direction |
Back-to-front airflow |
| Number of fans |
3 fan(s) |
| Built-in processor |
Yes |
| Processor frequency |
1800 MHz |
| Internal memory |
16384 MB |
| Flash memory |
32768 MB |
| Power source |
AC |
| Power supply included |
Yes |
| Redundant power supply (RPS) support |
Yes |
| Number of power supply units |
2 |
| AC input voltage |
100 – 240 V |
| AC input frequency |
47/63 Hz |
| Power consumption (max) |
425 W |
| Power over Ethernet (PoE) |
No |
| Operating temperature (T-T) |
0 – 45 °C |
| Storage temperature (T-T) |
-40 – 70 °C |
| Operating relative humidity (H-H) |
15 – 95% |
| Storage relative humidity (H-H) |
15 – 95% |
| Heat dissipation |
1450 BTU/h |
| Width |
442.5 mm |
| Depth |
406.4 mm |
| Height |
44 mm |
| Weight |
8.19 kg |
