Description
Using 10GbE Uplink Switch With Reasonable Price
With Gigabit connectivity plus four 10GbE uplinks, the XGS1935 Series is an ideal option for those who need basic functions, easier management, and a more reasonable price to upgrade their networks and ensure network efficiency for continuous business productivity.
Manage It Your Way!
The support of NebulaFlex allows you to easily switch network management modes between standalone, and our license-free Nebula cloud management platform. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller.
Anytime, Anywhere with
Nebula Mobile App
– Easy device onboarding: QR code scan
– At a glance of network status
– Remote control your network
– Reboot AP, Camera by PoE power cycle
– Block clients with unusual traffic
Web-managed with advanced features
You can configure and manage advanced features like static routing, VLAN, QoS, IGMP Snooping, Link Aggregation, IPv6 and DoS prevention through an intuitive built-in Web-based browser. Moreover, the friendly step-by-step intuitive wizard helps avoiding multiple complicated configuration pages for quick set up with few clicks in the matter of minutes.
Powering more devices intelligently
The PoE models XGS1935-28HP and XGS1935-52HP are designed with compact dimensions and support PoE+ delivering 30W per port, making them ideal for dense PoE deployments. With a 375W high-power budget, they can meet the demands of power-hungry devices. Additionally, the power consumption mode improves budget efficiency for a better ROI, allowing more PD devices to be connected within the system.
Silent, and reliable operation
This Series is built with smart fan designed to automatically adjust speeds based on the device temperature, offering near silent operation and stable connection for your daily work.
Built with nature in mind
The XGS1935 series is built with a more compact chassis, reducing packaging by up to 36% and weight by up to 22% compared to the previous XGS1930 series. These efforts have resulted in a 48% increase in units per pallet and a reduced carbon footprint.
| Feature |
Feature Value |
| Switch type |
Managed |
| Switch layer |
L2+/L3 |
| Quality of Service (QoS) support |
Yes |
| Web-based management |
Yes |
| Cloud-managed |
Yes |
| Traffic classification |
Yes |
| Traffic shaping |
Yes |
| ARP inspection |
Yes |
| Configuring Location Settings (CLI) |
Yes |
| System event log |
Yes |
| Basic switching RJ-45 Ethernet ports quantity |
48 |
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000) |
| Installed SFP modules quantity |
0 |
| Installed SFP+ modules quantity |
0 |
| SFP+ module slots quantity |
4 |
| Networking standards |
IEEE 802.1D, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| 10G support |
Yes |
| VLAN support |
Yes |
| MAC address table |
16000 entries |
| Switching capacity |
176 Gbit/s |
| Forwarding rate |
130.9 Mpps |
| Jumbo frames support |
Yes |
| Packet buffer memory |
1.5 MB |
| DHCP features |
DHCP client, DHCP relay |
| IGMP snooping |
Yes |
| Multicast support |
Yes |
| Rack mounting |
Yes |
| Internal memory |
512 MB |
| Flash memory |
32 MB |
| Mean time between failures (MTBF) |
919583 h |
| Power source |
AC |
| Power supply included |
Yes |
| AC input voltage |
100 – 240 V |
| AC input frequency |
50/60 Hz |
| Power consumption (typical) |
24.7 W |
| Power consumption (max) |
45.6 W |
| Power protection features |
Surge protection |
| Power over Ethernet (PoE) |
No |
| Operating temperature (T-T) |
-20 – 50 °C |
| Storage temperature (T-T) |
-40 – 70 °C |
| Operating relative humidity (H-H) |
10 – 90% |
| Heat dissipation |
155.594 BTU/h |
| Width |
440 mm |
| Depth |
270 mm |
| Height |
43 mm |
| Weight |
3.7 kg |
| Cables included |
AC |
| Rack mount kit |
Yes |
