Juniper CBL-EX-PWR-C19-C20 power cable 2.5 m C19 coupler C20 coupler
This item is currently unavailable for next day delivery, however you may still order this item as a back-order?
PC AC-PATCH CORD (16A/250V 2.5M)
Call Us Today! 0203 617 7663 | info@miragetek.co.uk
PC AC-PATCH CORD (16A/250V 2.5M)
Each AC appliance inlet on the AC power supply requires a dedicated AC power feed. Most sites distribute power through a main conduit that leads to frame-mounted power distribution panels, one of which can be located at the top of the rack that houses the switch. Each AC power cord connects the power supply to the power distribution panel.
Each detachable AC power cord is 2.5 meters (approximately 8 feet) long. The appliance coupler at the female end of the cord inserts into the AC appliance inlet on the faceplate of the AC power supply. The coupler type is C19 as described by the International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.
Feature | Feature Value |
---|---|
Cable length | 2.5 m |
Connector 1 | C19 coupler |
Connector 2 | C20 coupler |
Compatibility | Juniper EX8200 |
Input voltage | 250 V |
AC input frequency | 50 Hz |
Input current | 16 A |
Cable length | 2.5 m |
---|---|
Connector 2 | C20 coupler |
Input voltage | 250 V |
Input current | 16 A |
Connector 1 | C19 coupler |
Compatibility | Juniper EX8200 |
AC input frequency | 50 Hz |
PC AC-PATCH CORD (16A/250V,2.5M)
Each AC appliance inlet on the AC power supply requires a dedicated AC power feed. Most sites distribute power through a main conduit that leads to frame-mounted power distribution panels, one of which can be located at the top of the rack that houses the switch. Each AC power cord connects the power supply to the power distribution panel.
Each detachable AC power cord is 2.5 meters (approximately 8 feet) long. The appliance coupler at the female end of the cord inserts into the AC appliance inlet on the faceplate of the AC power supply. The coupler type is C19 as described by the International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.
Feature | Feature Value |
---|---|
Cable length | 2.5 m |
Connector 1 | C19 coupler |
Connector 2 | C20 coupler |
Compatibility | Juniper EX8200 |
Input voltage | 250 V |
AC input frequency | 50 Hz |
Input current | 16 A |
Cable length | 2.5 m |
---|---|
Connector 2 | C20 coupler |
Input voltage | 250 V |
Input current | 16 A |
Connector 1 | C19 coupler |
Compatibility | Juniper EX8200 |
AC input frequency | 50 Hz |